Additional Photos

Aquacore

AquaCore™ has a consistency like moist sand. It is shipped with its full water content. AquaCore™ is used to form simple shapes via pressure packing into molds or through CNC machining simple blocks. AquaCore™ does not gain strength until it has reached a moderate level of drying. AquaCore™ mandrels are porous and need to be sealed before composite processing to prevent resin infiltration.

Downloadable Content

Safety Data Sheet

Specifications and Features

AquaCore™ Benefits:

• Washes Away in Cold Tap water
• Environmentally Friendly
• Non-toxic and odorless
• Removable from previously inaccessible hidden areas
• Easily dried in a conventional oven
• Strong and lightweight
• Easy to repair
• Compatible with all commercial resins and pre-preg compounds

Compressive Strength: 500 psi at 70° F/21° C
Density Dry: 33.7 lbs. / cu. ft. at 250 psi compaction (0.53 g/cm³)
Coefficient of Thermal Expansion: 4.68 x 10-6 mm / mm° C

Request Information

If you would like to request specific information about this product and it’s applications or use with your specific needs, please fill out the form below and we will happily get back to you with information to help assist.